Loading... Please wait...
SWINGO XP
The Taski swingo XP is a battery-powered, stand-on autoscrubber. Clean and dry in a single pass, reducing the risk of slips and falls. Conservative water and energy consumption makes the swingo XP an excellent choice for sustainability. Take advantage of increased productivity with excellent maneuverability, speed, and reduced fill stops.
Theoretical performance, per hour: sq ft (4,500 sq m)
Working width: 30 inch (75 cm)
Squeegee width: 37 inch (94 cm)
Solution tank capacity: 28gal (105L)
Recovery tank capacity: 28gal (105L)
Rated voltage: 24 V
Nominal consumption: 1,200 W
Battery capacity (max): 195 Ah/C5
Battery run time: 3.5h
Weight, no batteries or water: 397lbs (180 kg)
Weight, batteries and water: 905lbs (410 kg)
Dimensions, Length x Width x Height: 47 x 37 x 50 inches (119 x 95 x 126 cm)
Brush system: 18 x 6 in (45 x 15 cm) (2)
Brush speed: 550 rpm
Brush pressure: 35–95lbs (15.9-43.1 kg)
Cleaning speed: 4 mph (6 km/h)
Sound level: 65 dB(A)
Theoretical performance, per hour: sq ft (4,500 sq m)
Working width: 30 inch (75 cm)
Squeegee width: 37 inch (94 cm)
Solution tank capacity: 28gal (105L)
Recovery tank capacity: 28gal (105L)
Rated voltage: 24 V
Nominal consumption: 1,200 W
Battery capacity (max): 195 Ah/C5
Battery run time: 3.5h
Weight, no batteries or water: 397lbs (180 kg)
Weight, batteries and water: 905lbs (410 kg)
Dimensions, Length x Width x Height: 47 x 37 x 50 inches (119 x 95 x 126 cm)
Brush system: 18 x 6 in (45 x 15 cm) (2)
Brush speed: 550 rpm
Brush pressure: 35–95lbs (15.9-43.1 kg)
Cleaning speed: 4 mph (6 km/h)
Sound level: 65 dB(A)
Diagrams
- View all diagrams
- - Batteries, Brushes and Charger - Machines Sold Before 2016
- - Batteries, Brushes and Charger - Machines Starting in 2016
- - Know Your Machine
- - Pad Holders
- -Simplified Electrical System
- -Simplified Recovery System
- -Simplified Solution System
- Accessories Assembly
- Brush Drive Assembly - 1
- Brush Drive Assembly - 2
- Brush Drive Assembly - 3
- Chassis Assembly
- Cover Assembly
- Handle Assembly
- IntelliSweep Assembly - 1
- IntelliSweep Assembly - 2
- IntelliSweep Assembly - 3
- Solution Assembly
- Squeegee Assembly
- Squeegee Lowering Mechanism Assembly
- Tank Assembly
- Tank Assembly - IntelliSweep
- Tool Lowering Assembly
- Wiring Diagram - Batteries and Electrical Parts
- Wiring Diagram - Main
Manuals
- Brierly Technologies CBSW1-S CBSW2-S User Manual
- Swingo XP parts manual_V1_2023
- Swingo XP parts manual_V2_2023
- TASKI swingo XP Technical Manual V4.0
Bulletins
- 24V Pump_2009
- Air Filter Induction_2008
- Antistatic Strap Implementation_2011
- Ball Joint and Flat Spring_2009
- Batteries Information_2017
- Bevel Gear and Support_2009
- Brush Lowering Device Modification_2010
- Brush Rubber Caps_2009
- Cable Harness Enhancement_2015
- Cable Protection Profile_2009
- Charger Installation_2019
- Charger Mounting_2015
- Charger_2018
- Diode and Positive Terminal Marking_2015
- Distance Piece Charging Plug_2015
- Excentric Shaft_2007
- Improved Firmware_2007
- Improved Tank Cover Locking_2007
- Intellidose Electronics Revision_2017
- Linear Brush Drive Unit_2009
- Lowering Device Spring Bracket_2009
- Magnetic Valve_2018
- Marking of Connection_2015
- Motordrive Brake_2008
- New Bumper Wheels_2003
- New Ceramic Axle_2016
- New Charger_2015
- New Control Board Set_2014
- New Drain Hose_2014
- New Draining Hose_2010
- New Firmware v3.21_2009
- New Firmware v3.32_2009
- New Firmware v3.34_2010
- New Firmware v3.35_2010
- New Firmware v3.36_2012
- New Firmware v3.40_2012
- New Firmware v3.41_2012
- New Firmware v3.42_2013
- New Firmware v3.51_2014
- New Firmware v3.52_2015
- New Firmware v3.53_2015
- New Firmware v3.54_2016
- New Key_2013
- New Squeegee Blades_2008
- New Suction Hose_2016
- New Surface Coating_2013
- New Tank Cover_2009
- Optional Squeegee Blades_2018
- Pad Drive Modification_2011
- Sensors and Magnets_2012
- Service Tool Update v4.04_2011
- Service Tool Update v6.04_2012
- Service Tool Update v7.04_2013
- Service Tool Update v7.09_2014
- Service Tool v8.01_2015
- Service Tool version 8.30_2021
- Squeegee Lowering Mechanism_2008
- Squeegee Lowering_2007
- Squeegee Wheel_2008
- Tank Set_2008
- TASKI - swingo XP - TSS Bulletin - Tank Removal and Installation Instructions
- TASKI Service Tool Version 8.12_2016
- TASKI swingo 750B/755B/855B/1250B/1255B/1650B/2500/3500/4000/5000 JFit Installation
- TASKI swingo TSS Bulletin - How the Key Switch Works
- TASKI swingo XP Tech Service Bulletin - How to Reset the Power Electronics Board
- TASKI swingo XP Tech Service Bulletin - Safe Mode
- TASKI swingo XP Tech Service Bulletin - Train the Steering
- TASKI TSS Bulletin - Rating Plate Breakdown
- Taski XP, M-R - Optimised electonics
- Torsion Spring_2008
- Torsion Spring_2009
- USB Cable_2010
- Vacuum Motor Harmonisation_2008
- Wheel Option_2009
Videos
- TASKI Power/Control Board Testing Video
- TASKI swingo XP Common Issues and Repairs Video
- TASKI swingo XP Incorrect Solution Flow Video
- TASKI swingo XP Poor or No Pickup Video
- TASKI swingo XP Technical Overview Video
Repair Guides
- Check Brush Belt Gearing
- Check Brush Belt Tension
- Check for power to the actuator
- Check for power to the actuator
- Check for Power to the Motors
- Check Hall Sensor
- Check Leveling Arm for Damage
- Check Motor for Locked Up Condition
- Check Motor Idler Bearings
- Check the Belt Tensioner
- Replace Leveling Arm
- Replace Motor Idler Bearing
- Replace the actuator
- Replace the Belt Tensioner
- Replace the damaged belt gears
- Replace the Hall Sensor Assembly
- Replace the Motor
- Replace the Motor Belt
- Test the actuator
- Check Batteries
- Check Battery Cables
- Check Brush Motor Wiring
- Check Communication Cable
- Check Drive Motor Wiring
- Check Solenoid Wiring
- Check Solution Pump Wiring
- Check the battery charger
- Check the communication cable
- Check the Drive Motors
- Check the hall sensor switch assembly
- Check the Power Board Voltage for the Primary Components (and jumper pin if req'd)
- Check the Power Plug
- Check Vacuum Motor Wiring
- Replace Control Panel
- Replace Drive Motor Wiring
- Replace Power Board
- Replace Solenoid Wiring
- Replace the Batteries
- Replace the Battery Cables
- Replace the battery charger
- Replace the Brush Motor
- Replace the Brush Motor Wiring
- Replace the Communication Cable
- Replace the communication cable
- Replace the Drive Motor
- Replace the hall sensor assembly
- Replace the Key Switch
- Replace the Power Plug
- Replace the Solenoid Valve
- Replace the Solution Pump Wiring
- Replace the Stepboard Switch
- Replace the Vacuum Motor Wiring
- RESETTING THE POWER BOARD
- Self Test for the Vac Motor, Brushes, and Squeegee
- Test the Key Switch
- Test the Stepboard Switch
- Test Voltage Output from Power Board RS 232 Port
- Train the Hall Sensor
- Check Casters
- Check the Wheels
- Replace the Casters
- Replace the Wheels
- Check and Adjust Squeegee
- Check Drain Hose for Damage
- Check for Power to the Motor
- Check Recovery Tank Lid Seal
- Check Squeegee Blade for Damage
- Check Squeegee Roller Wheels
- Check the "recovery tank full" sensor
- Check the Squeegee Bracket
- Check the Squeegee Linkage
- Check To Make Sure Tank Cover Seals When Closed
- Check Vacuum Hose Condition
- Check Vacuum Hose for Clogs
- Check Vacuum Hoses Connections
- Check Vacuum Motor
- Clean the Filter Screen
- Replace Squeegee Bracket
- Replace squeegee roller wheels
- Replace the "recovery tank full" sensors
- Replace the Drain Hose
- Replace the Linkage
- Replace the Recovery Tank Lid Seal
- Replace the Squeegee Blades
- Replace the Vacuum Hose
- Replace the Vacuum Motor
- Check computer requirements
- Check if correct USB is being used
- Check if current Service Tool has been downloaded to Desktop
- Check that default drivers are not being used
- Check that machine is on
- Check that Service Tool has reconnected after firmware download
- Check that the appropriate firmware has been selected
- Check that the Service Tool and machine are still connected
- Check tool requirements
- Click the download start button
- Connect Service Tool to appropriate machine
- Make sure connection is not lost during download process
- Select the correct driver
- USB cable needs to connect machine to computer
- Add Water/Solution to Tank
- Check all hoses and fittings for leaks
- Check for power to the solenoid valve
- Check for Power to the Solution Pump
- Check the pump for leaks
- Check the solenoid valve for flow
- Check the tank for leaks
- Clean and Replace the Solution Filter
- Replace the leaking pump
- Replace the solenoid valve
- Replace the Solution Pump
- Replace the Supply Hose
- Replacing the feed hose
- Replacing the solenoid valve
- Replacing the tank
Docs
- Brierly Esprit Offboard Charger trouble codes
- TASKI - swingo XP, 2500, 3500, 4000, 5000 - Warranty Statement
- TASKI Floor Pad Matrix
- TASKI swingo XP - Maintenance Schedule
- TASKI swingo XP Error Codes
- TASKI swingo XP Self Test
- TASKI swingo XP Service Light Reset
- TASKI swingo XP Specification Sheet
- TASKI swingo XP Standard Repair Times
- TASKI SWINGO XP wall chart
- TASKI swingo XP Wall Chart
- TASKI Swingo XP/XP-M/XP-R Changing Model Settings