Loading... Please wait...
- Home
- Parts and Supplies
- TASKI by Diversey
- SWINGO 1650
SWINGO 1650
The TASKI swingo 1650 B is a battery-powered, walk-behind autoscrubber. The 23-gallon tank and reduced water consumption allows for longer cleaning times between tank fills, with a battery run time of more than four hours. Maintenance is a breeze with frequently cleaned or maintained parts color-coded in yellow and easily removed. Reduce the risk of slips and falls with the w-shaped squeegee that ensures excellent drying results.
Working width: 26 in (65 cm)
Squeegee width: 37 in (95 cm)
Practical performance per hour: 17,750 sq ft (1,650 sq m)
Solution tank: 23gal (85L)
Recovery tank: 23gal (85L)
Rated voltage: 24V
Nominal consumption: 1,200 W
Battery capacity (max): 180 Ah
Battery run time: over 4h
Weight, with batteries: 728lbs (330kg)
Dimensions, Length x Width x Height: 61 x 27 x 46 in (154 x 69 x 118 cm)
Brush system: 0.75 x 13 in (2 x 33 cm)
Sound level: 62 dBA
Working width: 26 in (65 cm)
Squeegee width: 37 in (95 cm)
Practical performance per hour: 17,750 sq ft (1,650 sq m)
Solution tank: 23gal (85L)
Recovery tank: 23gal (85L)
Rated voltage: 24V
Nominal consumption: 1,200 W
Battery capacity (max): 180 Ah
Battery run time: over 4h
Weight, with batteries: 728lbs (330kg)
Dimensions, Length x Width x Height: 61 x 27 x 46 in (154 x 69 x 118 cm)
Brush system: 0.75 x 13 in (2 x 33 cm)
Sound level: 62 dBA
Diagrams
- View all diagrams
- - Batteries, Brushes and Charger - Machines Sold Before 2016
- - Batteries, Brushes and Charger - Machines Starting in 2016
- - Frequently Replaced Parts
- - Know Your Machine
- - Manufacturer Recommended Stocking Parts
- - Pad Holders
- - Pads - 13 inch
- - Pads - 17 inch
- -Simplified Electrical System
- -Simplified Recovery System
- -Simplified Solution System
- Accessories Assembly - Before V5
- Battery Connections Assembly - Before V5
- Charger Assembly
- Chassis and Tank Assembly
- Drain Hose Assembly - Before V3
- Drive Assembly
- Guiding Castor Assembly
- Lower Assembly - After V4
- Scrub Deck Assembly - After V5 - 4135541
- Scrub Deck Assembly - After V5 - 4135562
- Scrub Deck Assembly - Before V5
- Scrub Deck Assembly - V5 - 4126923
- Scrub Deck Assembly - V5 - 4130236
- Solution Assembly - After V5
- Solution Assembly - Before V5
- Solution Assembly - V5
- Squeegee Assembly
- Squeegee Assembly - 4127410 - Before SN 7518692 - Before V5
- Squeegee Assembly - 4132398 - After V4
- Squeegee Assembly - After V5
- Squeegee Lowering Mechanism Assembly
- Tube Assembly - After V4
- Upper Assembly
- Wiring Diagram - After V5
- Wiring Diagram - Before V6
Manuals
- Swingo 1650_1850 parts manual V4_2023
- Swingo 1650_1850 parts manual V5_2023
- Swingo 1650_1850 V4 parts manual_2024
- Swingo 1650_1850 V5 parts manual_2024
- Swingo 1650_1850 V6 parts manual_2024
- TASKI swingo 1650/1850 Service Manual_2011
- TASKI swingo 1650/1850 Service Manual_2013
- TASKI swingo 1650/1850 User Manual
Bulletins
- 2 Castor Spare Part_2014
- 24V Pump_2009
- Batteries Information_2017
- Cable Harmonisation_2013
- Cable Harness Enhancement_2015
- Charger Installation_2019
- Charger Mounting_2015
- Charger_2018
- Diode and Positive Terminal Marking_2015
- Distance Piece Charging Plug_2015
- Draining Hose_2010
- Driving Disc Adjustment_2011
- Float Modification_2011
- Foot Pedal Modification_2015
- Fresh Water Hose Mounting_2015
- Harmonisation of Castor Wheel_2012
- Intellidose Electronics Revision_2017
- IntelliDose Modification_2014
- Key Switch Modification_2010
- Magnetic Valve_2018
- Marking of Connection_2015
- New Brush Lowering Mechanism_2012
- New Bumper Wheels_2003
- New Ceramic Axle_2016
- New Charger_2015
- New Drain Hose_2013
- New Drain Hose_2017
- New Drive Wheel 02E_2022
- New Firmware v1.03_2009
- New Firmware v1.04_2011
- New Firmware v1.05_2011
- New Firmware v1.08_2012
- New Firmware v1.11_2015
- New Firmware v1.12_2016
- New Hour Meter Cover_2012
- New Key_2013
- New Magnetic Valve_18E_2016.pdf
- New Magnetic Valve_2011
- New Membrane_2015
- New Suction Hose_2010
- New Surface Coating_2013
- New Vacuum Motor for B-Model 04E_2022
- New Wheels_2011
- Onboard Charger Harmonization_2019
- Optional Squeegee Rubber Blades 2019
- Optional Wheels_2017
- Pulley Set_2011
- Pulley_2012
- Reinforced Cover_2016
- Service Tool Update v6.04_2012
- Service Tool Update v7.04_2013
- Service Tool Update v7.09_2014
- Service Tool v8.01_2015
- Service Tool version 8.30_2021
- Squeaky Check Valve_2009
- Squeegee Bracket Adjustment_2012
- Squeegee Mechanism Bracket_2008
- Squeegee Movement Limitation_2013
- Squeegee Slide Bearing_2013
- Squeegee Wheel_2008
- Suction Hose_2012
- Suction Hose_2013
- Swingo 1650 Squeegee Update 2020
- TASKI - swingo 455B, 755B, 855B, 1255B, 1650, 1850B and 2100 - Solenoid Update 2018
- TASKI Service Tool Version 8.12_2016
- Taski Swingo 1650 GTS New Squeegee Assembly- 2020
- Taski Swingo 1650 Lithium Conversion Installation
- TASKI swingo 1650, 1850, 2100 - Retrofitting Valve Modification Instructions
- TASKI swingo 1650/1850 New Solenoid Installation Instructions
- TASKI swingo 1650/1850 Service Light Reset
- TASKI swingo 1650/1850 TSS Bulletin - Brush Lowering Mechanism
- TASKI swingo 1650/1850 TSS Bulletin - Adjusting Squeegee Lift Mechanism
- TASKI swingo 1650/1850 Wet Cell Conversion Guide
- TASKI swingo 1650/1850/2100 TSS Bulletin - Mounting Instructions for Retrofitting Valve
- TASKI swingo 750B/755B/855B/1250B/1255B/1650B/2500/3500/4000/5000 JFit Installation
- TASKI swingo TSS Bulletin - How the Key Switch Works
- TASKI TSS Bulletin - Rating Plate Breakdown
- TSS Bulletin - TASKI 1650 and 1850 - Reinforced Cover of the Pressure Bearing
- Vacuum Motor Harmonisation_2008
- Water Distribution Magnetic Valve_2018
- Y-Piece Fixation Modification_2012
Videos
- TASKI swingo 1650/1850 Incorrect Solution Flow Video
- TASKI swingo 1650/1850 Poor or No Pick Up Video
- TASKI swingo 1650/1850 Service Intro Video
- TASKI swingo 1650/1850 Solenoid Installation Video
- TASKI swingo 1650/1850 Squeegee Lift Mechanism Adjustments Video
- TASKI swingo 1650/1850 Using the Prop and Lock Assembly Video
- TASKI swingo 455B/755B/855B/1255B/1650/1850 Walk-Behind Install Video
Repair Guides
- Check Brush Belt for Damage
- Check Brush Belt Tension
- Check Brush for Damage
- Check Brush Pulley for Locked Up Condition
- Check for Power to the Motor
- Check Linkage for Functionality
- Check Motor Belt for Damage
- Check Motor for Locked Up Condition
- Check the Belt Tensioner
- Check the Brush Pulley
- Check the Linkage for Damage
- Replace Brush
- Replace the Belt Tensioner
- Replace the Brush Belt
- Replace the Brush Linkage (The Cradle)
- Replace the Brush Motor
- Replace the Brush Pulley
- Replace the Motor Belt
- Replace the Handle Mechanics
- Check Battery Cables
- Check Brush Motor Wiring
- Check Communication Cables
- Check Drive Motor Wiring
- Check Solenoid Wiring
- Check Solution Pump Wiring
- Check the brush micro switch
- Check the FWD/REV switch assembly
- Check the Power Board Voltage for the Primary Components
- Check the transaxle
- Check Vacuum Motor Wiring
- Check/Replace the Charger Plug and Safety Switch (Wet Cell Conversion)
- Replace Dash Board
- Replace Drive Motor Wiring
- Replace Power Board
- Replace Solenoid Wiring
- Replace the brush micro switch
- Replace the Brush Motor Wiring
- Replace the Communication Cable
- Replace the FWD/REV switch assembly
- Replace the Key Switch
- Replace the Solution Pump Wiring
- Replace the Vacuum Motor Wiring
- Test the Key Switch
- Check the Drive Motor
- Check the Wheels
- Replace the Transaxle
- Replace the Wheels
- Check Casters
- Check Drain Hose for Damage
- Check Filter Screen
- Check for Power to the Motor
- Check for Stuck Float
- Check Recovery Tank Lid Seal
- Check Squeegee Blade for Damage
- Check the Squeegee Linkage
- Check Vacuum Hose Condition
- Check Vacuum Hose Connection
- Check Vacuum Hose for Clogs
- Check Vacuum Motor
- Check/Replace the Squeegee Linkage
- Replace Float
- Replace the Drain Hose
- Replace the Filter Screen
- Replace the Recovery Tank Lid Seal
- Replace the Squeegee Blades
- Replace the Vacuum Hose
- Replace the Vacuum Motor
- Check computer requirements.
- Check if correct USB is being used.
- Check if current Service Tool has been downloaded to Desktop.
- Check that default drivers are not being used.
- Check that machine is on.
- Check that Service Tool has reconnected after firmware download.
- Check that the appropriate firmware has been selected.
- Check that the Service Tool and machine are still connected.
- Check tool requirements.
- Click the download start button.
- Connect Service Tool to appropriate machine.
- Make sure connection is not lost during download process.
- Select the correct driver.
- USB cable needs to connect machine to computer.
- Check all hoses and fittings for leaks
- Check for power to the solenoid valve
- Check for Power to the Solution Pump
- Check the filter housing for leaks
- Check the solenoid valve for flow
- Check the tank for leaks
- Clean and Replace the Solution Filter
- New Solenoid Installation
- Replace the solenoid valve
- Replace the Solution Pumps
Docs
- Swingo 1650/1850 Wall Chart
- TASKI - swingo 350B/E, 455B, 755B, 855B, 1255B, 1650B, 1850B - Warranty
- TASKI ergodisc 2000 - Maintenance Schedule
- TASKI Floor Pad Matrix
- Taski Service Tool and Firmware 8.30
- TASKI swingo 1650 and 1850 - Maintenance Schedule
- TASKI swingo 1650 Know Your Machine
- TASKI swingo 1650 Specification Sheet
- TASKI swingo 1650 Troubleshooting
- TASKI swingo 1650 Troubleshooting - Motor Band Installation
- TASKI swingo 1650B and 1850B - Maintenance Schedule
- TASKI swingo 1650B BMS Wallchart
- TASKI Swingo 1650B Brochure
- TASKI swingo 350B&E, 455B,755B,855B,1255B,1650B,1850B Limited Warranty as of November 2014