{
  "@context": "https://schema.org",
  "@type": "FAQPage",
  "mainEntity": [
    {
      "@type": "Question",
      "name": "What is the WolfPack 1,000 ft CAT6a S/FTP cable?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "The WolfPack 1,000 ft CAT6a S/FTP cable is a bulk network cable supplied on a convenient spool for permanent network installations, infrastructure expansion, and longer cable runs. It is designed for high-performance structured cabling and KVM extender applications where reliable data transmission and controlled interference are important. The cable uses CAT6a performance with a 500 MHz bandwidth."
      }
    },
    {
      "@type": "Question",
      "name": "What network speed does the CAT6a cable support?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "The cable supports 10-Gigabit Ethernet speeds over distances of up to 100 meters when installed as part of a compliant CAT6a channel. This makes it suitable for high-speed networking and compatible KVM extender infrastructure. Actual performance also depends on the connected equipment, termination quality, installation practices, and complete channel design."
      }
    },
    {
      "@type": "Question",
      "name": "What is the bandwidth of this CAT6a cable?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "The cable provides a 500 MHz bandwidth, giving it greater frequency performance and bandwidth headroom than earlier Category 5e and Category 6 cabling. The higher bandwidth is useful for demanding data-networking applications and KVM extender systems that require reliable high-speed signal transmission."
      }
    },
    {
      "@type": "Question",
      "name": "What type of conductors does the cable use?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "The cable uses 23 AWG solid pure copper conductors for dependable signal transmission and long-term structured-cabling performance. Solid copper conductors are intended for permanent installations where the cable is routed through building infrastructure and terminated at a patch panel or keystone jack."
      }
    },
    {
      "@type": "Question",
      "name": "Is the WolfPack CAT6a cable shielded?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Yes, the cable uses shielded construction designed to help reduce electromagnetic interference and crosstalk in demanding network installations. Its design also incorporates measures for controlling Power-Sum Alien Crosstalk between adjacent cables. This can help maintain signal integrity in dense cabling environments."
      }
    },
    {
      "@type": "Question",
      "name": "What are the center spline and pair ribbing used for?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "The cable incorporates a center spline and pair-separation ribbing to help maintain consistent spacing between the twisted pairs. Maintaining pair separation helps control crosstalk and supports reliable signal integrity, particularly in high-bandwidth CAT6a network installations."
      }
    },
    {
      "@type": "Question",
      "name": "Can this cable be used for PoE and VoIP?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Yes, the cable is suitable for Power over Ethernet and Voice over IP applications where stable network transmission is required. Its CAT6a performance, solid copper conductors, and shielded construction make it appropriate for structured network deployments supporting bandwidth-intensive and powered Ethernet devices."
      }
    },
    {
      "@type": "Question",
      "name": "Is this cable suitable for KVM extenders?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Yes, it is specifically intended for KVM extender applications and can be used as structured cabling between compatible KVM extender equipment. The CAT6a specification provides the bandwidth needed for compatible high-performance KVM systems, but the actual supported resolution and extension distance should always be checked against the specific KVM extender."
      }
    },
    {
      "@type": "Question",
      "name": "Can the cable be terminated directly with an RJ45 plug?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "No. Because the cable uses larger 23 AWG solid conductors and is intended for permanent structured cabling, it is not designed to be crimped directly onto standard RJ45 connectors. The product should instead be terminated by punching the conductors down into a compatible CAT6a keystone jack or patch panel. Appropriate termination hardware helps maintain the cable's specified performance."
      }
    },
    {
      "@type": "Question",
      "name": "Does the cable comply with CAT6a standards?",
      "acceptedAnswer": {
        "@type": "Answer",
        "text": "Yes, the cable has been tested for compliance with ANSI/TIA-568.2-D Category 6A structured-cabling specifications. This makes it suitable for professional network infrastructure installations where standards-based CAT6a performance is required. Proper installation and compatible components are still important for achieving compliant channel performance."
      }
    }
  ]
}